HF2211 Serial Server Device User Manual
http://www.iotworkshop.com - 43 -
Figure 56. Switch Transparent Transmission Mode to Cli Command Mode
<Notes>:
In Cli command mode, users can set or query parameters. Cli command details see next chapter
4.2. Cli Command Overview
Cli command can be input through terminal (SecureCRT or other UART tools) or by user device MCU
programming. As below picture, we use SecureCRT tool. Press “Tab” key, it will list current available
Cli command or directory. If intput first character and then press “Tab” key, it will show the Cli
command fit with the first character.
Figure 57. Cli Command Root Directory
To Next Page
Loading...