Flomec Q9 User Manual

6
SPECIFICATIONS
Q9 COMPUTER ELECTRONICS
MECHANICAL
Housing
Material
Transparent Amorphous Nylon
Operating
Temperature
(Standard
Display)
+0°F to +1
30
°F (
-
18°C to +
55
°C)
With following Alkaline batteries installed:
Energizer, E92 or En92 (or) Duracell, Mn2400.
-------------------------------------
+0°F to +140°F (-18°C to +60°C)
With following Lithium batteries installed:
Energizer, L92.
Storage
Temperature
-
40°F to +158°F (
-
40°C to +70°C)
With batteries removed from display.
Hi
-
Temp
Display
(G2S Meters
Only)
See Ambient and Fluid Temperature Limits graph on next page.
If wider operating temperature ranges are desired, reference
information on FLOMEC® Remote Kits.
ELECTRICAL
Input
Pulse
Rate
Frequency Range: 0.25 Hz – 3kHz
K-Factor
Minimum:
0
.0
0
1 pulses/unit
Maximum: >999,999 pulses/unit
Field
Calibration
Correction
Minimum: -99.999%
Maximum: +99.999%
Readout
Totals
Minimum Display:
0.0
0
1
Maximum Display: 999,999 (x100)
Field
Calibration
Yes
Power
Internal Power Supply:
(2) Alkal
ine AAA batteries @ 1.5
-
volts each
Battery Life: 2+ years
NOTE: For externally powered daughter board modules see
specific module owner’s manual for voltage specifications.
STANDARD FEATURES INCLUDE
•
(2) Totalizing Registers
• (1) Factory Calibration Curve
• (1) Field Calibration Curve
• Rate of Flow Feature
• Flowrate Time Period in Day, Hour,
minutes, or Seconds

Flomec Q9 Specifications

General

Brand	Flomec
Model	Q9
Category	Measuring Instruments
Language	English