FLORA LJ3208P - Ink Supply Compartment; Electrical Compartment; Drying System

Flora Digital Printing System
Model LJ320P
Copyright 2011@ Shenzhen Runtianzhi Image Technology Co.,Ltd. By Victor Xu
~16~
3.4 Ink Supply Compartment
Ink supply station contains two compartments. One is on the right side for ink pumps and filter, while
the other one is on the back right side for ink bottles.
3.5 Electrical Compartment
Electrical compartment is a shelf for mounting USB Board, Servo Card, Media Board, transformer
and DC power supply. It is built in steel frame.
3.6 Drying System
Because of speciality of the ink, one drying system is necessary for output job. This system is fixed in
front of the machine, including Hot drying and Cold drying system.
Fig.3.4-1 Ink Pump Compartment
Buzze
r
Bulk Filte
r
Ink Pump
A
ir Pump
Flush Pump
Fig.3.4-2 Ink Bottle Compartment
Ink Bottle
Waste ink Bottle
Fig.3.6-1 Drying System
Heatin
g
Plate
Hot wind Fans
Cold Air Fans
Power Inlet
Fig.3.6-2 Fan Switch &Temp. Controller
Hot-Fans Switch
Cold-Fans Switch
Temp. Controller
Fig.3.5-1 Electrical Shelf
Media Sensor
Transformer
36VDC Power Suppl
y
24VDC Power Suppl
y
Take-up Media PCB
Feedin
g
Media PCB
USB Board
Servo Card