FLORA LJ3208P - USB Driver Installation

Flora Digital Printing System
Model LJ320P
Copyright 2011@ Shenzhen Runtianzhi Image Technology Co.,Ltd. By Victor Xu
~38~
2) Files will be extracted and later on 【Welcome】 window will appear. Click “Next”, coming with
【choose setup language】 window, select you language then click “Next”;
3) Click “Next” when 【Welcome】 window. Then, 【Select Model】 window will appear. Choose
the particular model of the machine you are about to install, then click “Next”;
4) The software will now start to detect the specified destination folder, if it is not auto detected,
you need to browse ?:\??\SAi\SAi Production Suite. Click “Next” to initiate the installation
process;
5) Click “Finish” after the successful installation and restart your computer;
5.3.3 Install USB Driver
For this machine, there are two USB Boards and the driver for USB need to be installed by
manually.