FLORA LJ3208P - Print Option Tag Configuration

Flora Digital Printing System
Model LJ320P
Copyright 2011@ Shenzhen Runtianzhi Image Technology Co.,Ltd. By Victor Xu
~57~
6.4.5 Print Option Tag
This test is being performed in order to verify the conditions of the Print head nozzles
before printing. It prints a swatch which could represent the nozzles to be firing on a definite
order.
From the FloraPrint driver window, select “Test Print head” the drop-down list click on
the “Align colors” button.
1
3
5
2
4
6
Spot white must
un-tick this box
Fig.6.4.4-1 Color Management Windows
Fig.6.4.5-1 Print Option Tag & Test Print Tool Bar
Raster
test
Exit
Print Option Tag
Refer to 6.4.6.1
Send
Print
Parameter
setting
Test Data Card
Communication
Test Print head
Communication
Forward
(Media)
Left
(Carriage)
Backward
(Media)
Right
(Carriage)