Fluke 5500A - Introduction

1
Getting Started
Introduction
The Fluke Model 5500A Multi-Product Calibrator (Figure 1) is a precise instrument that
calibrates a wide variety of electrical measuring instruments. With the 5500A Calibrator,
you can calibrate precision multimeters that measure ac or dc voltage, ac or dc current,
ac or dc power, resistance, capacitance, and temperature. With the Oscilloscope
Calibration option, you can use the 5500A Calibrator to calibrate analog and digital
oscilloscopes. Specifications are provided in this manual. Complete operating
information is provided in the Operator Manual and complete service information is
provided in the Service Manual. Both manuals are provided on the CD-ROM you
received with your Calibrator.
Warning
If the 5500A Calibrator is operated in any way not specified by
this manual or other documentation provided by Fluke, the
protection provided by the Calibrator may be impaired.
0•
123
456
789
ENTER
M
k
m
VHz
FIELD
EDIT
/
+
F
OPRSTBY EARTH SCOPE BOOST MENU
PREV
SHIFT
RESET
CE
SETUP
REF
NEW
TC
MEAS
¡F
µ
n
p
W
dBm sec
¡C
POWER
A
MULT
x
DIV
÷
OUT
TRIG
HI
LO
TC
TRIG
OUT
1000V
RMS
MAX
20V
RMS
MAX
1V PK
MAX
20V PK
MAX
NORMAL AUX
SCOPE
V, ,
RTD
A, -SENSE,
AUX V
60V PK
MAX
20V PK
MAX
5500A
CALIBRATOR
F1-01.eps
Figure 1. 5500A Multi-Product Calibrator