Fluke 5500A - AC Voltage, Triangle Wave Characteristics (Typical); AC Current (Sinewave) Extended Bandwidth Specifications; AC Current (Non-Sinewave) Specifications

5500A
Getting Started
34
AC Voltage, Triangle wave Characteristics (typical)
Linearity to 1 kHz Aberrations
0.3% of p-p value, from 10% to 90% point <1% of pk-to-pk value, with amplitude >50% of range
AC Current (Sinewave) Extended Bandwidth Specifications
Ranges Frequency
1-Year Absolute Uncertainty,
tcal + 5°C,
+ (% of output + % of range) [2]
Maximum
Current
Resolution
%Output %Range
All current ranges, <330 mA 0.01 - 10 Hz 5.0% 0.5% 2 digits each
range
10 - 10 kHz See “AC Current (Sinewave) Specifications”
AC Current (Non-Sinewave) Specifications
Trianglewave &
Truncated Sinewave
Frequency
1-Year Absolute Uncertainty,
tcal + 5°C,
+ (% of output + % of range) [2]
Maximum
Current
Ranges [1]
%Output %Range
Resolution
2.9 to 92.999 mA 0.01 to 10 Hz 5.0% 0.5% Two digits, e.g., 75 mA
10 to 45 Hz 0.25% 0.5%
45 to 1 kHz 0.25% 0.25% Six digits on each
range
1 to 10 kHz 5.0% 0.5%
93 to 929.999 mA 0.01 to 10 Hz 5.0% 0.5% Two digits
10 to 45 Hz 0.25% 0.5%
45 to 1 kHz 0.25% 0.5% Six digits on each
range
1 to 10kHz 5.0% 1.0%
0.93 to 6.19999 A 10 to 45 Hz 5.0% 1.0% Two digits
45 to 1kHz 0.5% 0.5% Six digits on each
range
1 to 5 kHz 5.0% 1.0%
6.2 to 31 A 45 to 500 Hz 2.0% 0.5% Two digits on each
range
500 to 1 kHz 5.0% 1.0% Six digits on each
range
[1] All waveforms are peak-to-peak output ranges.
[2] Uncertainty is stated in peak-to-peak. Amplitude is verified using an rms-responding DMM.