Fluke 5520A - Instrument Setup Menu

24
Instrument Setup Menu
Press INSTMT SETUP in the setup menu to open
the instrument setup menu.
oe09f.eps
OTHER SETUP opens a menu to select the
temperature standard, set the clock, and change
the power-up defaults for displayed error units and
safety timeout period for an oscilloscope option
test.
OUTPUT SETUP opens a menu to change the
power-up defaults for current and voltage limits,
thermocouple and RTD types, the phase
reference, internal or external phase reference
source, impedance for dBm display, and pressure
units.
DISPLAY SETUP opens submenus to adjust the
brightness and contrast of both the Control Display
and Output Display.
REMOTE SETUP opens menus to configure the
two serial ports and the IEEE488 port.