46
12. The Control Display shows entered value. For
example, 123.4567 mV and 234.567 mA.
oe36f.eps
13. Press E.
oe37f.eps
14. Press O to activate the Calibrator output.
(Enter voltage
or
current and then a watts entry
value using bA. The remaining volts or
current value is calculated and displayed.)
oe80f.eps
I OUT selects AUX or 20A terminals. Current
outputs 3A or above are always on the 20A
terminals.
“LO”s ties or opens a connection between front
panel NORMAL LO and AUX LO terminals.
To Next Page
Loading...
