Pressure Controller/Calibrator
Connect to Mains Power
11
Connect to Mains Power
Warning
To prevent shock hazard, connect the factory-supplied three-
conductor mains power cord to a properly-grounded power
outlet. Do not use a two-conductor adapter or extension cord,
as it will break the protective ground connection.
Mains Voltage
To power the Product, mains voltage ranging from 100 V ac to 240 V ac with
frequencies from 47 Hz to 63 Hz is required.
The Product comes with the appropriate line power plug for the country of
purchase. If a different type is necessary, refer to Table 3 and Figure 1. They list
and show the mains line power plug types available from Fluke Calibration.
Table 3. Line Power Cord Types Available from Fluke Calibration
Type Fluke Calibration Option Number
North America LC-1
Universal Euro LC-3
United Kingdom LC-4
Switzerland LC-5
Australia LC-6
South Africa LC-7
Brazil LC-42
Universal EuroNorth American/Japan United Kingdom
Australia/China
Swiss
South Africa Brazil
LC-1
LC-3
LC-4
LC-5
LC-6
LC-7 LC-42
hhp004.eps
Figure 1. Available Mains Power Cord Types
To Next Page
Loading...
