Pressure Controller/Calibrator
Front-Panel Features
27
Front-Panel Features
This section is a reference for the front and rear panel features and the User
Interface (UI) touchscreen. The front-panel features (including all controls,
displays, indicators, and terminals) are shown and explained in Table 7.
Table 7. Front-Panel Features
1 2 3
4
5
678
9
9
huo010.eps
Item Description
The color touch-sensitive display shows the measured pressure, control setpoint,
and other active conditions and messages. The display provides controls not
available with the keys alone. The interface is made up of multiple menus,
described in User Interface.
Numbered keys to change numerical values on the Product user interface. To enter
a value, touch an editable section of the display and then change the numerical
values with the numbered keys. When entering a new number, there is no need to
push back or
to clear the current number. Simply type the new number. Push
ENTER to accept and set the entry. For example, to set an output of 100 psi,
select the editable field on the touchscreen and then push
ENTER.
Note
The Product will only control pressure when in the Control
mode. See Control Mode for more information.
Backspace key - As a new output value is entered with the numbered keys, use the
backspace key to delete the last key entry.
Clear Entry clears the value entry in progress.
To Next Page
Loading...
