NetTool
Users Manual
1-10
Updating NetTool’s Software
From time to time, updates to NetTool’s software become
available.
• Select the NetTool icon then select About
NetTool to find out what version of software is
installed on the tester.
• To find out if there is a new software version
available, go to www.flukenetworks.com
. Select
NetTool from the Find your product selection box.
Click the software link to display the Software page.
Check the version number to determine if it is later
than the version installed on your tester.
To update NetTool:
1. Follow the web instructions to download the update
file to your PC.
2. Connect the supplied serial cable between NetTool
and the PC (see “Serial Port Connection” in Chapter
2) then transfer the files from the PC to the tester.
To Next Page
Loading...
Need help?
General