22
onlyxedintheupperholderoncethisisdone.
Checkthat the battery is ttedsecurely.Always
remove the key A5 from the lock A6 once you
have fastened it shut. This will prevent the key
from falling out or the battery being removed by
unauthorised third parties when your e-bike is
parked.
To remove the PowerTube battery A10, switch it
o.UnlockthelockwiththekeyA5. The battery
moves into the locking position. Unlock the bat
-
tery, tilt it out of the upper holder A7 and pull it out
of the lower holder
A9.
5.7 Storingthebattery
Please read the instructions and regulations on
battery storage in the separate operating instruc-
tions for the batteries.
6.Legalrequirements
However, the rules and regulations for
E-bikes are constantly being revised and
changed. Stay informed about changes
in legislation in order to remain up-to-
date.
For pedelecs and E-bikes, special provisions ap
-
ply for their limit of use. This means that E-bikes
are partly operated like a bicycle and other times
not.
Before riding on public roads with your FL
YER,
inform yourself on the current legal requirements
enforced in your country.
This information can be found at your FLYER re
-
tail store, the respective national bike or e-bike
associations and online.
Here
you can gather information on how your
FLYER must be equipped in order to ride it on
public roads.
The lighting system required to be installed or
carried with you is also described. You will also
be informed on which brakes the bike needs to
be equipped with.
By reading the national legislation, you can also
obtain information about the current age required
to ride the bike and where it is allowed or must be
ridden. The regulations for children riding on pub
-
lic roads are also found here. It will be made clear
if a helmet is required to be worn by law
.
Check whether your private third-party-li-
ability insurance covers possible damage
caused by using a FL
YER E-bike.
S-Pedelec
The FLYER S-Pedelec with pedal assist up to
45 km/h is no longer a bicycle but a motor ve-
hicle. This means that it requires authorisation.
only
xedintheupperholderoncethisisdone.
Checkthatthebatteryisttedsecurely.
Always remove the key A25 from the lock A26
once you have fastened it shut. This will prevent
the key from falling out or the battery being re
-
moved by unauthorised third parties when your
e-bike is parked.
To remove the PowerTube bat-
tery A21,
switchito.Unlockthelockwiththekey
A25. Pull the battery by the lug out of the upper
holder A27 and pull it out of the lower holder A29.
Luggagerackbattery
The key (A5) must be inserted in the lock (A6)
beforethebatterycanbetted.Tottheluggage
rack battery A1, slide it and its contacts forwards
until they click into place on the holder A7 on the
luggagerack.Checkthatthebatteryisttedse
-
curely. Always fasten the battery with lock A6,
otherwise the lock will open and the battery may
fall out of the holder.
To remove the luggage rack battery A1, switch it
oandunlockthelockwiththekeyA5. Remove
the battery from the holder A7.
InstallingPowerTubefrombelow
A9
A7
A5
To insert the PowerTube battery A10, place it on
the e-bike with its contacts on the lower holder
A9. Tilt it into the upper holder A7 until it reaches
the limit stop and audibly clicks in. The battery is