Flyer Gotour 6 - 11. After a Fall; Post-Fall Inspection Procedures

32
Move the handlebars to the desired position (2).
Close the quick release lever completely to fasten
the handlebars (3).
Open the quick release lever in order to turn the
handlebars sideways (1).
2
3
1
You are in the optimal driving positon when your
front knee is directly above the pedal while the
crank is horizontally aligned.
The horizontal adjustment of the seat may only
be performed within the markers and within the
rangespeciedbythemanufacturer.
Test whether the seat post and the seat
arermlyattachedbeforeyoudriveo󰀨.
To do this, hold the seat at the front and
back and attempt to turn it. It should not
move.
Heightofthehandlebars
Once the seat has been rmly and comfortably
positioned, the handlebars must be adjusted to
your needs.
Ane󰀨ectivestartingpositionforrelaxedridingis
o󰀨eredbyaseatingpositionin whichthe upper
body and arm form a 90° angle.
In order to change the height of the handlebars,
the height of the stem must be adjusted.
Allow your FLYER specialist retailer to
adjust the settings of the handlebars and
the stem.
SpeedlifterTwist
The Speedlifter allows you to adjust the height
of the handlebars in only a few movements. The
Twist system makes it possible to turn the handle
-
bars 90 degrees to save space while transporting
your FL
YER.
Open the quick release lever of the Speedlifter (1)
1