Flying Voice Technology IP542N - Ending a Call; Text Message

FLYINGVOICE Page
29
of
72
Enable Call Waiting:
You can turn call waiting on or off from menu in Menu/6References item.
User can also enable call waiting by using your PC to open SIP Account/Account X (1/2/3/4) webpage, User column.
5.12 Ending a Call
To end a handset call, hang up the handset.
To end a Handsfree call, press the Handsfree button.
To end a headset call, press the headset button.
5.13 Text Message
5.13.1 Sending Message
Step 1.Press Menu button, and then choose 3Text Message by using the up button or the down button.
Step 2.Press the softkey button under select to enter to 1SEND item.
Step 3.Press the softkey button under select to edit message.
Note: When inputting text, use the softkey button under en to change the input method among numbers, capital and lowercase English
letters, en stands lower case, EN stands capital letter, and num stands digit
Step 4.Press the softkey button under ok to input receivers’ phone number.
Note: IP542N support group mails, user can send one message to 10 friends or family one a time;
Press the softkey button under ok to access to input the next receiver’s phone number;
You can also select one number in phonebook by pressing the softkey button under pbook.
If user has configuration the phone numbers which you want to send, press the softkey button under ok twice to access to the
next item (Sender number).
Step 5.Set Sender phone number, default is line1’s phone number.