Flying Voice Technology IP542N - Reading Message; DND (Do Not Disturb)

FLYINGVOICE Page
30
of
72
Step 6.Press the softkey button under select to send message.
5.13.2 Reading Message
Step 1.Press Menu button, and then choose 3Text Message by using the up button or the down button.
Step 2.Press the softkey button under select to enter to 2Recived Box item or Sent Box item.
Note: In Received Box are messages have received from others including new messages and old messages. The ones in Sent Box are
messages have sent out.
Step 3.Press the softkey button under select to access to the next item. Choose the message you want to read by using the up button or the
down button.
5.14 DND (Do Not Disturb)
Use the Do Not Disturb feature to prevent incoming calls when sometimes you don’t want somebody interrupt.
To enable Do Not Disturb, just press the softkey button under dnd, then the LCD will display “Do Not Disturb” under the IP address of
Internet port and the function name of the softkey will change to –dnd.
Press the softkey button under –dnd again to disable Do Not Disturb.