Flying Voice Technology IP542N - Rebooting Your Phone; Factory Default

FLYINGVOICE Page
33
of
72
6.5 Rebooting Your Phone
This setting is to configure and troubleshoot the network. You should not change these settings unless directed to by your Administrator as this
can negatively affect your phone’s function.
To reboot your phone:
Step 1.Press the Menu button, Scroll to 16Reboot
Step 2.press the softkey button under select to access to reboot item.
Step 3.Then a notice “Confirm System Reboot” will appear, press the softkey button under ok to confirm rebooting.
6.6 Factory default
There two ways to make factory default: from menu and from your PC to use IP542N’s webpage.
From menu:
Step 1.Press Menu button and choose 17factory Default
Step 2.Press the softkey button under select to access to factory default item.
Step 3.Then a notice will appear, press the softkey button under ok to continue.
Using Website:
Step 1.Access to website, open Administration/Management webpage;
Step 2.Press the factory default button at the bottom of the webpage;
Step 3.Waiting about 5 seconds, the red notice will appear, and then press Reboot button to reboot IP542N.
Note: If you choose factory default, you will return the phone to the original factory settings and will erase all current settings, including the
directory and call logs.