33
SAFETY INSTRUCTIONS
CAUTION:
Besides following the instructions mentioned in this manual, when using electric equipment you
must always observe all safety precautions to prevent risk of fire, electric shock and personal
injury.
Read this instruction manual before use and keep it carefully.
Working with power tools can be dangerous if you do not follow suitable safety measures. As for
any electric machine with moving parts, the use of a tool entails some risks. If you use the
machine as prescribed in this manual, you pay careful attention to the work you are doing, you
observe the regulations and you use the suitable personal devices of protection, you can reduce
the probability of risk. The possible remaining risks are related to:
1 – electrical shock due to direct or indirect contact with electrical parts
2 – injuries due to contact with moving parts
3 – injuries due to contact with angular, sharp parts or while changing the disk
4 – injuries due to the ejection of tool parts or of the material you are processing
5 – injuries due to noise
6 – injuries due to dust
7 – injuries due to the fact that the tool has been not assembled correctly
The probability of risk can be reduced by the safety equipment of the machines, as for example
the protections, the blade case, the clamping, the stoppage and the personal protection devices
as protective goggles, the dust mask, ear plugs, protective shoes and gloves. However, even
the best protection devices cannot protect you from the risks due to lack of good sense and
attention. Have always good sense and observe the necessary precautions. Carry out only the
works that you consider safe. DO NOT FORGET: everyone is responsible for his safety.
This tool has been designed for specific purposes. Femi recommends you not to modify it or
use it for purposes different from the ones for which it has been manufactured. If you have any
doubts regarding specific applications, do not use the machine before having contacted us and
received our instructions.
READ AND KEEP THIS MANUAL
To Next Page
Loading...
