Loading postage – TELESET
27
Interrupt TELESET
You can interrupt the procedure as long as the
connection to the TELESET data center has not yet
been established. To do so:
• Wrong entries (e.g. when entering amounts) can
be deleted with the key.
• You can enter a new amount and continue the
procedure
or
exit the TELESET mode with the key.
During connection setup
• Press the key.
The Optimail aborts TELESET mode.
The display shows the postage value again.
You will find help for TELESET errors in
Chapter 12.2.
To Next Page
Loading...
