Appendix - Instructions for installation
57
Phone cable
• Plug the phone cable into the Optimail’s modem
socket. The modem socket is at the rear of the
Optimail. The spring on the plug must be facing
the side panel.
• Connect the phone cable to the telephone socket.
The Optimail is configured for one of the following
types of connection to the telephone line according
to your order.
– Main line with DTMF dialing method (Dual Tone
Multifrequency)
– Extension with dual tone multifrequency (DTMF)
dialing method – outside line seizure with digit “0”
and pause
You will find further information about the connection
types and setting the outside dialing parameters for
the built-in modem on page 59.
Step 6: Switching on
Caution! When you move the Optimail from a cold
environment (i.e. below 50°F/10°C):
Wait at least 2 hours before starting the postage
meter. The Optimail adapts to room temperature.
Any condensation evaporates.
Switching on
• Insert the key provided in the keylock on the back
of the Optimail.
• Turn the key to the horizontal position ( = ON).
To Next Page
Loading...