– 7 –
FS 913 M / FS 913 P
EN
Proper installation and placement
If the oven is to be permanently connected to the
power supply:
Ensure that the device is installed only by the
customer service, an electrician or trained
personnel with the appropriate knowledge/
education.
Ensure that the device is installed in a way that
allows to disconnect it from the power supply,
with a contact opening distance that ensures
complete disconnection in category III overvoltage
conditions.
Ensure that the device is connected directly to the
mains socket.
– Ensure that no adapters, no multi-sockets and
no extension cables are used to connect the
device.
Ensure that the device is not exposed to
atmospheric agents (rain, sun).
Proper use
Only use the device to prepare and cook food.
Use oven gloves when placing containers in the
oven or when taking containers out of the oven.
Observe the manuals of the cooking devices that
are used with the oven when using the device.
Do not place power cables of other electric
appliances on hot parts of the oven.
Do not use the oven chamber to store any
objects.
Do not use flammable liquids near the oven.
Only use the temperature probe recommended
for this oven.
Risk of overheating and malfunction of the oven
due to blocked ventilation!
Never cover the inside walls of the oven with
aluminium foil, especially the lower part of the
oven chamber.
Do not block the ventilation of the fan or the
cooling openings above the oven door.
Damage to the enamel in the oven due to wrong
handling of pots or containers!
During cooking, never place pots or containers
directly on the floor of the oven chamber.
Place pots and containers only on the racks or
enamel trays provided in the oven chamber, on
one of the five shelves available.
Risk of burns!
The oven and its accessible parts become very hot
during use.
Do not to touch the heating elements inside the
oven.
Risk of burns!
The end of the door handle may be hotter due to hot
air being vented.
When opening or closing the door, always hold the
door handle in the middle.
Always make sure that the control knobs are in
the off position when the oven is not in use.
Risk of electric shock due to damaged
device!
Do not switch on a damaged device.
Switch off the fuse in the fuse box.
Contact the customer service.
Risk of electric shock!
Do not touch the device with wet parts of your
body.
Do not use the device when barefoot.
Do not pull on the device or power cable to
unplug it from the socket.
Maintenance and cleaning
Before maintenance or cleaning:
Disconnect the device from the power supply,
e.g., switch off the fuse in the fuse box.
The oven uses a special enamel which is easy to
keep clean. However, Franke recommends to clean
it frequently in order to avoid baking on grime and
previous cooking residues.
Do not use coarse abrasive materials or sharp
metal scrapers to clean the glass parts of the
oven door, as they could scratch the surface and
cause the glass to shatter.
Do not use steam cleaners or direct jets of water.
Risk of electric shock due to entering
liquid!
The device contains electrical components.
Make sure that no liquid enters the interior of the
device.
Do not use pressurised steam to clean the device.
Do not use a wet cloth to clean the operating
elements.
To Next Page
Loading...
Need help?
General