– 16 –
FS 913 M / FS 913 P
EN
Example for a complete menu program
Press .
Press MEAT.
The summary of the complete menu appears:
Section Description
PROGRAM
Automatic set-up of the
cooking program
TEMPERATURE
Automatic set-up of the
temperature
TRAY INFO
Automatic display of the
optimal position for the tray
TIME
Automatic set-up of the
cooking duration
Place the prepared food in the oven chamber and
close the oven door.
Press to confirm.
The cooking program starts.
To stop the program, press and press .
The details of the recipes (ingredients and
preparation) are available on our web site:
– http://recipes.franke.com
Scheduling an end time for cooking
In manual cooking mode
Press .
The menu MANUAL with different sections
appears.
Press the area on the top of the display where the
time is displayed (e.g.
).
The sub
menu view
appears.
Press .
Choose hours, minutes and seconds by scrolling
through the vertical menu.
Confirm with .
The oven is now in standby mode.
The oven calculates the start time based on the
chosen cooking time or cooking program and the
preset end time. Cooking will start at the calculated
start time.
Setting the timer
The timer can be used in all cooking modes, it is
independent from any function.
Press the area on the top of the display where the
time is displayed (e.g.
).
The sub
menu view
appears.
Press .
Choose hours, minutes and seconds by scrolling
through the vertical menu.
Press again the area on the top of the display
where the time is displayed (e.g.
).
Press to confirm.
The timer runs in the background.
When finished, you hear a sound.
To Next Page
Loading...
Need help?
General