– 13 –
FS 913 M / FS 913 P
EN
swITChIng on The fIrsT TIme
When using the oven for the first time:
Open the front door and ensure that the oven is
empty. Remove all accessories.
Ensure that the room is well aired, e.g., open the
doors and windows.
Press to start the oven.
After starting, the main view appears.
Press .
In the SYSTEM section select the program
MULTICOOKING.
In the TEMPERATURE section, select the
maximum temperature (270°C).
In the DURATION section, select 00
h
40
m
.
Operate the oven while empty at maximum
temperature with the door fully open
The odour detectable during this operation results
from the evaporation of substances used to protect
the oven during the time between manufacture and
actual installation.
After the 40 minutes, the oven stops automatically
and will be ready for use.
ConfIgurIng The dIsplay
This chapter explains how to set up your display
features according to your preferences.
Starting the configuration
Press .
The SETUP menu with different options
appears.
Configuring the time
Press TIME AND DATE.
Choose hours, minutes and seconds by scrolling
through the list.
Configuring the language
Press LANGUAGE.
Choose your language by scrolling through the
list.
Configuring the display brightness
Press DISPLAY BRIGHTNESS.
Set the brightness of the control panel by
selecting one of the segments of the bar.
Configuring the volume of the alarm tone
Press SOUND.
Set the volume by selecting one of the segments
of the bar.
Configuring the clock display type
Press CLOCK DISPLAY TYPE.
Select your favourite skin: analogue clock or
digital clock.
Switching the display off
The display can switch off automatically when the
oven is switched off. If this option is activated, the
clock is not visible.
Press DISPLAY OFF.
Finishing the configuration
To confirm the configuration, press .
The main menu appears. Your settings will be
saved.
To Next Page
Loading...
Need help?
General