Franklin Rex Pro - Using the Docking Station; Installing the Batteries

Using the Docking Station 53
5
Chapter 5
Using the Docking Station
You will need to use the Docking Station if your computer does not
have a PC card slot, or if you are running Windows NT 4.0.
Installing the
batteries
To install new batteries:
1 Remove the battery cover on the back of the Docking Station. To
do so, first compress the tab. Then lift the cover.
2 Install four AAA 1.5-volt batteries in the battery compartment, as
shown on the diagram.
3 Replace the battery cover.
4 Insert the flat end of the stand into the slot on the back of the
Docking Station.
Lift the
cover of
the
Docking
Station.