Freescale Semiconductor PE Micro Cyclone Pro

To Next Page

To Previous Page

Cyclone PRO User Manual 29

CYCLONE PRO

Figure 4-10: Edit IP Settings: Show MAC Address

4.2.5.2 Configure Cyclone: Edit Cyclone Name

Edit Cyclone Name allows the user to set the name for the Cyclone PRO.

The current name is displayed on the second line. Use the Up/Down

buttons to scroll through the characters. To select a character, hit the

Select button. When you are finished, scroll through the characters until

you reach the -

(right-arrow) character. Selecting this character will

complete the process. Press the Cancel button at any point to leave the

name as is and return to the Main Menu.

Figure 4-11: Configure Cyclone: Edit Cyclone Name

4.2.5.3 Configure Cyclone: Set AUX Button Func

Set AUX Button Func allows the user to assign a function to the AUX

button of the Cyclone PRO. Highlight the function you wish to assign to

the AUX button and press the Select button to choose it.

Freescale Semiconductor PE Micro Cyclone Pro - Page 35