Alert Messages
Alert messages are displayed in the message field to
notify the driver when certain conditions occur. They
include warnings, cautions, and other messages that
require the driver’s attention. Not all alert messages
are critical to the operation of the vehicle. More im-
portant messages take priority over less important
messages.
NOTE: All alert messages follow the format
shown in
Fig. 4.20.
Press the + switch to acknowledge alert messages
and revert to the previously displayed driving screen.
The following alert messages will repeat intermittently
until the condition is eliminated:
•
turn signal on
•
low voltage
•
no datalink
Driving Screens
With the parking brake off, only the driving screens
are available. Use the + and – switches on the steer-
ing wheel to scroll through the driving screens; see
Fig. 4.21. To reset any values, press and hold the +
switch.
•
Temperature
•
MPG information
•
Trip information
•
Leg information
•
Gauge display (if selected)
•
Enter parked menus
Parked Screens/Menus
Park the vehicle and set the parking brake to access
the parked menus and submenus. See
Fig. 4.22.To
reset values in any of the menus, press and hold the
+ switch.
•
Trip information
•
Fuel information
•
Engine information
1/7
NW
77 °F
06/26/2012 f611165
10
A
econ
5555555 mi
12
3
4
65 mph
1. Gear Display
2. Temperature and Compass
3. Cruise Control Status Field
4. Odometer
Fig. 4.19, Driver Message Center with Gear Display,
ICU4Me
Park Brake On!
06/12/2012 f611192
10
A
econ
5555555 mi
Fig. 4.20, Parking Brake Alert Message
Time &
Temperature
MPG
Information
+
−
−
Trip
Information
Enter to
Stationary
Menu
+
Gauge
Display
Screens
Leg
Information
+
+
−
+
−
+
−
02/20/2013 f040823a
−
(if selected)
Use the + and – switches on the dash to navigate
through the driving screens.
Fig. 4.21, Driving Screen Navigation, ICU4Me
Instruments
4.23
To Next Page
Loading...
