the seat. Pull the cable handle labeled ACCESS for-
ward to open the sleeper door. The secondary
method is the black knob located at the upper rear
edge of the sleeper door opening. Pull the knob
down to open the sleeper door.
IMPORTANT: The sleeper access doors are
two-stage latching. When closing the doors, en-
sure that they are completely latched to prevent
wind noise and water intrusion.
Sliding Side Window
The lower section of the sliding side window moves
vertically and may be locked in multiple positions to
suit. Two spring-loaded tabs are located at the top of
the sliding section. To adjust the window, pull both
tabs toward the center of the glass and move the
sliding section to the desired height. Release the
tabs to lock the sliding section.
Cab Features
9.3
To Next Page
Loading...
