Frick QUANTUM 4 - Page 45

FRICK

QUANTUM™ COMPRESSOR CONTROL PANEL S90-010 M
MAINTENANCE Page 45
Auxiliary Analog Temperatures and Pressures:
Enabled Disabled
Entering Process Temperature:
Enabled Disabled
Slide Valve Position Control: Remote Control Setpoint:
Enabled Disabled Enabled Disabled
Permissive Start:
Disable Always Active Starting
Remote Enable Energized when in:
Remote Start Only
Remote Start and Remote
Slide Valve
Remote Start and Remote
Slide Valve (4-20 mA)
Digital Board 2 Module 1 configuration:
Ready to Run PLC Control
Run Hours: ______
Power Assist:
Enable Disable Delay (0-60) sec. default = 15
Screen Color Setting: Screen Saver (10 minutes) _________ (range is 0-60 minutes)
Standard Monochrome Blue
Enabled Disabled