Froling Lambdatronic H 3200 Service Handbook

2 | Power connection and wiring
36 B1820023_en | Service handbook Lambdatronic H 3200 - T4e
Completing the parameter settings
After setting the parameters, you must restart the frequency converter to apply the new settings.
NOTICE
Malfunctions after setting parameters!
If the frequency converter becomes inoperable after setting the required
parameters:
r Perform a factory reset
r Set the parameters again
Ä The “Start”, “Back” and “Stop” buttons and the “potentiometer” usually have no
function after the frequency converter has been programmed.
You can restore the factory settings by setting parameter P 112 to 1. The parameter then automatically returns
to the value 0 and the frequency converter displays the message "F048".

Froling Lambdatronic H 3200 Specifications

General

Brand	Froling
Model	Lambdatronic H 3200
Category	Boiler
Language	English