10
General
Principle
Device concept
and applications
The FlexTrack 45 welding carriage is intended for welding of butt and llet welds in the
MIG/MAG or CMT process, with or without oscillation.
It can be used on rigid or exible rails and on rigid or exible guide rings.
min. 1500 mm
min. 1100 mm
The compact welding carriage can be used in a wide range of applications. Three differ-
ent rail types are available to suit differing requirements and surface geometries.
The carriage is entirely remote-controlled, making it perfect for universal use.
STRAIGHT application:
FLEXIBLE application:
To Next Page
Loading...
