16
The operating instructions help you to use the welding carriage safely and efciently, and
must therefore be to hand at all times.
- Keep the various sections of the operating instructions at the location where the weld-
ing carriage is being used at all times.
- Clearly mark the place where the instructions are kept.
- Ensure that all persons working with the welding carriage know where the operating
instructions are located.
- The operating instructions will only be able to help you in the event of a problem if
they are at hand!
IMPORTANT! The manufacturer shall not be liable for any damage that arises from fail-
ure to observe the operating instructions.
Operating in-
structions
Spare parts,
wearing parts
and auxiliary
materials
Use of third-party spare and wearing parts may pose risks. Use approved Fronius origi-
nal spare parts only.
The manufacturer cannot accept any liability for damage resulting from the use of spare
or wearing parts or auxiliary materials that are not approved by the manufacturer.
Personal protec-
tive equipment
Local regulations In some countries, local statutory regulations may apply that are not included in these
operating instructions. It is the duty of the operator to be aware of and comply with any
local statutory regulations. This relates primarily to regulations concerning:
- Accident prevention
- Machine safety
- Protection of personnel (protective equipment)
- Environmental protection
- Electrical system
The operator alone is responsible for the immediate working environment.
The following safety measures must be put in place and employed:
- Welding goggles
- Welding shield
- Welding gloves
- Welding apparel
- Welding footwear
To Next Page
Loading...
