3 Copy
108
Copy
3
The copies are creased in half and stapled at the center. The number of copies that can
be creased and stapled is 2 to 15.
îš„Crease
This option is displayed when the Booklet Maker Unit for Finisher-B1 (optional) is
installed.
The copies are creased in half. The number of copies that can be creased is up to 5.
When the number is more than 5, the document is divided by every 5 sheet.
îš„Crease & Staple
This option is displayed when the Booklet Maker Unit for Finisher-B1 (optional) is
installed.
The copies are creased in half and stapled at the center. The number of copies that can
be creased and stapled is 2 to 15.
Covers (Attaching Covers to Copies)
This feature allows you to attach covers to copies.
You can use different types of paper (such as colored paper and heavyweight paper)
as the front and back covers of copies.
Important • When you select this feature, if the number of pages scanned by the machine exceeds the
maximum, the machine will not print the already-scanned data. In that case, follow the
instructions of the message displayed on the screen to cancel the job. The maximum
number of pages that the machine can scan is 999 pages per job.
Note • This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
1 Select [Covers].
2 Select any option.
îš„Front Cover
Attaches a front cover to the copies.
z
Off
No front cover is attached.
z
Blank Cover
Blank sheets of paper are attached as front covers.
z
Print on Side 1
The first page of the document is copied on the front side of the front cover.
To Next Page
Loading...
Need help?
General
