Fax
4
4 Fax
198
Recipient Print Sets (Printing Multiple Sets at the Remote Machine)
This feature allows you to print multiple sets of a fax document at the remote machine.
Note • This feature is not available for the Server Fax service.
1 Select [Recipient Print Sets].
2 Select any option.
1 Set
The remote machine will output one set of the fax document.
Multiple Sets
Allows you to specify the number of print sets the remote machine will output, in the
range from 2 to 99 in 1 set increments.
Use [+] and [-] or the numeric keypad to specify the value.
Note • You cannot specify the number of print sets when using IP Fax (SIP).
Pages per Side (Combining Multiple Pages into One Sheet)
This feature allows you to send a fax by combining multiple pages of a document into
one side of a single sheet of paper. For example, if you have a document of 12 pages,
and you select [3 Pages], the machine combines the scan data into 4 pages. You can
specify a value for [Pages per Side] in the range from 2 to 9.
Important • If the length of each resultant page is too long, the output data may be split on the recipient’s
machine.
• If the number of pages of documents is smaller than the specified pages, the scanned
number of pages will be only combined and transmitted.
Note • This feature is not available for some models. An optional component is required. For more
information, contact our Customer Support Center.
1 Select [Pages per Side].
To Next Page
Loading...
