Fuji Xerox DocuCentre-IV 3060

5 Scan
236
Scan
5
Operations during Scanning
The following describes the operations available during scanning. The following shows
the reference section for each operation.
Stopping the Scan Job...............................................................................................................236
Previewing the Scanned Images during a Scan Job..................................................................237
Changing Scan Settings ............................................................................................................238
Stopping the Scan Job
To cancel scanning a document, use the following procedure.
1 Press either the <Stop> button on the control
panel or [Delete] on the touch screen.
2 Select [Delete].
If [Delete] does not appear on the screen:
1 Press the <Job Status> button.
123
456
789
0#
C
<Stop> button
123
456
789
0#
C
<Job Status> button