5 Scan
228
Scan
5
Scanning Procedure
This section describes the basic scanning procedure. The following shows the
reference section for each procedure.
Step 1 Loading Documents.......................................................................................................228
Step 2 Selecting the Features ....................................................................................................230
Step 3 Starting the Scan Job......................................................................................................233
Step 4 Confirming the Scan Job in Job Status ..........................................................................234
Step 5 Saving the Scanned Data ...............................................................................................235
Step 1 Loading Documents
The following two methods are available to load documents:
îš„Document Feeder (optional)
z
Single sheet
z
Multiple sheets
îš„Document Glass
z
Single sheet
z
Bound documents, such as books
Document Feeder
The document feeder supports single and multiple sheet documents with sizes from 85
× 125 mm (Standard size: A5, A5 ) to 297 × 432 mm (Standard size: A3, 11 × 17").
The document feeder automatically detects standard size documents. For non-
standard size documents, enter the size on the [Original Size] screen.
Note • The document feeder is optional. For more information, contact our Customer Support
Center.
For information on document sizes that can be detected automatically and how to enter a non-standard
document size, refer to "Original Size (Specifying a Scan Size)" (P.287).
The standard document sizes that can be detected automatically depend on [Paper Size Settings] in the
System Administration mode. For information on paper size settings, refer to "5 Tools" > "Common
Service Settings" > "Other Settings" > "Paper Size Settings" in the Administrator Guide.
The document feeder accepts the following number of sheets.
Important • To avoid paper jams, use the document glass for folded or wrinkled documents,
cut-and-pasted documents, curled paper, or back carbon paper.
• 2-sided scanning of lightweight paper (38 - 49 gsm) is not supported.
For information on how to scan mixed sized documents, refer to "Mixed Sized Originals (Scanning
Different Size Documents Simultaneously)" (P.288).
Document Type (Weight)
Number of
Sheets
Lightweight paper (38 - 49 gsm) 110 sheets
Plain paper (50 - 80 gsm) 110 sheets
Heavyweight paper (81 - 128 gsm) 75 sheets
To Next Page
Loading...
Need help?
General
