Print
363
Computer Operations
11
Print
This section describes how to print with the machine by operating on a computer.
Print Features
The main print features of the machine are as follows:
Printing Using a Print Driver
For more information on print features, click [Help] on the print driver screen to view the print driver's
help. For information on printing, refer to "Printing" (P.365).
Note • Some features become available after you make option settings on the [Configuration] tab.
The unavailable features are grayed out.
îš„Pages Per Sheet (N-Up)
Prints multiple pages onto one sheet of paper.
îš„2 Sided Printing
Prints data on both sides of paper.
îš„Poster
Splits one page of print data into multiple sheets of paper and enlarges the printed
image to fit the size of each sheet. Used to create large posters, etc.
îš„Booklet Creation
Performs 2-sided printing and page allocation for printing a booklet in correct page order.
îš„Transparency Separators
Automatically inserts a blank sheet of paper as a separator each time a transparency
is printed.
îš„Watermark
Prints preset text, such as "Confidential", over the print data.
îš„Secure Print
Temporarily stores the print data on the machine, to print it with the print command from
the machine. This feature allows you to set a passcode, which is helpful to print
confidential documents.
For information, refer to "Secure Print" (P.345).
îš„Sample Set
Before printing multiple sets of a document, you can first print one set for trial, and then
print the remaining sets from the machine.
For information, refer to "Sample Set" (P.347).
îš„Delayed Print
Temporarily stores the print data on the machine to print it at specified time.
For information, refer to "Delayed Print" (P.349).
îš„Store in Remote Folder
Temporarily stores the print data in a registered folder, to print the data with the print
command from the machine.
To Next Page
Loading...
Need help?
General
