Fax
4
4 Fax
144
1 Open the document cover.
Important • Ensure that the touch screen is active,
and then load a document. Otherwise, the
machine may not properly detect the
document size.
2 Load the document face down, and align it
against the top left corner of the document
glass.
Note • When you load a A5, B5 or A4 document
on the document glass in portrait
orientation, the scanned image is
transmitted with 180 degrees rotated.
3 Close the document cover.
Note • When a standard size document is loaded on the document glass, the size of the document
is displayed in the message field.
Step 2 Selecting Features
The following two services are available to send faxes.
Simple Fax
Allows you to only select basic features to send faxes.
Fax/Internet Fax
Allows you to make detailed settings to send faxes.
The following procedure uses [Fax/Internet Fax] to describe how to select features.
You can select the Fax or Internet Fax service, or the Server Fax service on the
[Services Home] screen.
For information on the Simple Fax service, refer to "Simple Fax" (P.167).
Important • The Fax and Internet Fax services are not available while the Server Fax service is enabled.
Note • The features displayed on the screen depend on your machine configuration.
• When the Authentication or Accounting feature is enabled, a user ID and passcode may be
required. Ask your system administrator for the user ID and passcode.
1 Press the <Services Home> button.
To Next Page
Loading...
