Fax
4
4 Fax
178
Specifying a Destination Using the Redial Feature
You can specify recipients using the Redial feature.
Important • When transmission to a certain recipient is prohibited in the System Administration mode,
the [Redial list] button cannot be used.
1 Select [Redial List].
2 Select items you want to specify for a
recipient, and select [Close].
Specifying a Line (Port)
You can specify lines using the keyboard screen. When the Additional G3 Port Kit 2
(optional) is installed, you can specify the line (port) and send faxes. Local terminal
information can be registered to each line. You can use each line for a different
purpose.
Important • When transmission to a certain recipient is prohibited in the System Administration mode,
the [New Recipients] button cannot be used.
For information on how to set [Local Terminal Information], refer to "5 Tools" > "Fax Service Settings" >
"Local Terminal Information" in the Administrator Guide.
1 Select [New Recipients].
To Next Page
Loading...
Need help?
General
