7 Job Flow Sheets
316
Job Flow Sheets
7
Job Flow Procedure
Job flow sheets are categorized into two types according to the target. One type of job
flow sheets targets scanned documents, and the other type targets files stored in
folders. This section describes the first type of job flow sheets, targeting scanned
documents.
For information on job flow sheets that target files stored in folders, refer to "Configuring/Starting Job
Flow" (P.309).
The following describes the procedure to operate a job flow. Refer to the following
section for each procedure.
To create and register a job flow sheet, use a computer.
Step 1 Opening the [Job Flow Sheets] Screen ..........................................................................316
Step 2 Selecting a Job Flow Sheet ............................................................................................317
Step 3 Confirming/Changing the Job Flow Sheet.....................................................................317
Step 4 Starting the Job Flow Sheet ...........................................................................................317
Note • To create a job flow sheet, use EasyOperator or Device Setup Tool. EasyOperator is
included in the Driver CD Kit provided with the machine. You can download Device Setup
Tool from Fuji Xerox website.
Step 1 Opening the [Job Flow Sheets] Screen
The following describes how to open the [Job Flow Sheets] screen.
1 Press the <Services Home> button.
2 Select [Job Flow Sheets].
To Next Page
Loading...
Need help?
General
