Registering/Deleting/Renaming Stored Programs
327
Stored Programming
8
3 Select [Delete].
îš„Delete
Deletes the stored program.
Note • Deleted stored programs cannot be restored.
îš„Cancel
Cancels deleting the stored program.
Entering/Changing a Stored Program Name
The following describes how to enter or change the name of a stored program.
Up to 18 characters are allowed for a stored program's name.
For information on how to enter characters, refer to "Entering Text" (P.63).
1 Select [Enter/Change Name].
2 Select the number to register or change a
name.
Note • Select [ ] to return to the previous
screen or [ ] to move to the next screen.
3 Enter a name, and select [Save].
Assigning/Changing Icons for Stored Programs
The following describes how to assign or change an icon of a stored program.
You can select from 12 icons.
1 Select [Assign/Change Icon].
2 Select the number to assign or change an
icon.
Note • Select [ ] to return to the previous screen or [ ] to move to the next screen.
To Next Page
Loading...
Need help?
General
