Output Format
115
Copy
3
îš„Position
Displays the [Comment - Position] screen.
You can select a comment position from nine options.
For side 2 of copy sheets, you can select [Same as Side 1] or [Mirror Side 1].
îš„Font Size
Displays the [Comment - Font Size] screen.
You can select a comment size from three options, or can directly specify the size in
the range from 6 to 64 points in 1 point increments.
[Date] Screen
This screen allows you to add a date onto copies. The date shows when you started
copying the document.
You can change the date format. For more information, refer to "5 Tools" > "Common Service Settings" >
"Watermark" > "Date Format" in the Administrator Guide.
1 Select any option.
îš„Off
No date is added.
îš„On
A date is added.
îš„Apply To
Displays the [Apply Date To] screen.
You can select whether to add a date onto the first copy page only, or onto each copy
page.
îš„Position
Displays the [Date- Position] screen.
You can select a date position from six options.
For side 2 of copy sheets, you can select [Same as Side 1] or [Mirror Side 1].
îš„Font Size
Displays the [Date - Font Size] screen.
You can select a date size from three options, or can directly specify a size in the range
from 6 to 24 points in 1 point increments.
To Next Page
Loading...
Need help?
General
