Scan Service Settings
177
Tools
5
Important • When [Device Color Space] is selected as default and [Color Space] (P.180) is set to
[Disabled], [Auto Detect] of [Color Scanning] in the First Tab does not appear. In addition,
when the High Compression Image Kit (optional) is enabled, [MRC High Compression]
under [File Format] is not displayed either.
Original Orientation
Set the default value for [Original Orientation] in the [Layout Adjustment] screen.
Resolution
Set the default value for [Resolution] in the [Layout Adjustment] screen.
You can select from [200 dpi], [300 dpi], [400 dpi], and [600 dpi].
Mixed Sized Originals
Set the default value for [Mixed Sized Originals] in the [Layout Adjustment] screen.
Edge Erase
Set the default value for [Edge Erase] in the [Layout Adjustment] screen. You can select from
[All Edges] and [Parallel Edges].
Edge Erase - Top & Bottom Edges
Set the default value for [Top & Bottom] in [Edge Erase] in the [Layout Adjustment] screen.
Specify a value from 0 to 50 mm in 1 mm increments.
Edge Erase - Left & Right Edges
Set the default value for [Left & Right] in [Edge Erase] in the [Layout Adjustment] screen.
Specify a value from 0 to 50 mm in 1 mm increments.
Center Erase/Binding Edge Erase
Set the default value for [Center] in [Edge Erase] in the [Layout Adjustment] screen. Specify a
value from 0 to 50 mm in 1 mm increments.
Quality/File Size
Set the default value for [Quality/File Size] in the [Filling Options] screen.
Select from [Quality: Normal/File Size: Small], [Quality: Higher +1/File Size: Larger +1],
[Quality: Higher +2/File Size: Larger +2], [Quality: Higher +3/File Size: Larger +3], and
[Quality: Maximum/File Size: Largest].
E-mail Subject
Set the default value for the e-mail subject. Up to 128 characters can be entered for the
subject.
Store & Send Link - E-mail Subject
Set the default value for the subject used for the Store & Send Link feature. Up to 128
characters can be entered for the subject.
Searchable Text
Set the default value for [Searchable Text] in the [File Format] screen under the First Tab.
Note • This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
Language of the Original
Set the default language to identify the text on a document.
Downloaded From ManualsPrinter.com Manuals