15 Problem Solving
506
Problem Solving
15
5 Remove the jammed staples (c), and then
return the metal part pulled up in step 4 to
the original position (
d).
6 Push the staple cartridge into the machine
until it clicks into place.
7 Close the finisher front cover.
Note • If the finisher front cover is not completely closed, a message will appear and the machine
remains paused.
If you cannot remove jammed staples even after you perform the above procedure,
contact our Customer Support Center.
Staple Jams in Staple Cartridge (For Finisher-B1)
This section describes how to clear staple jam occurred in the staple cartridge of the
Finisher-B1 (optional).
1 Make sure that the machine is not operating,
and open the finisher front cover.
Be careful in removing jammed staples.
Be careful not to get injured by waste staples when detaching a staple dust box.
Waste staples may come out with output paper. Be careful not to get injured by the
staples.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
