Paper Jams
495
Problem Solving
15
Paper Jams in Tray 4 (When Tandem Tray Module is Installed)
The following describes how to clear paper jams occurring in Tray 4 when the Tandem
Tray Module is installed.
1 Pull out Tray 4.
Important • If you pull out a paper tray without
checking the paper jam location, the
jammed paper may be torn and the
pieces may remain inside the machine.
This may cause machine malfunctions;
therefore, always check where the paper
jam occurred first.
2 Remove the jammed paper.
Note • If the paper is torn, make sure no piece of
paper remains inside the machine.
3 If paper is jammed in the paper feed section,
open the inner cover and gently remove the
paper.
4 Push the tray in gently until it stops.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
