Installation When Using TCP/IP (LPD/Port 9100)
255
Printer Environment Settings
7
CentreWare Internet Services Setting Items
You can configure the following setting items using CentreWare Internet Services:
For details on the setting items, click [Help] at the upper right corner of the CentreWare Internet
Services screen to see help.
For information on how to start CentreWare Internet Services, refer to "Starting CentreWare Internet
Services" (P.242).
z
Spool Destination for Jobs
([Properties] > [General Setup] > [Memory Settings] > [LPD])
Note • The spool destination can be configured when the LPD port is enabled.
z
Receiving buffer size for Port 9100
([Properties] > [General Setup] > [Memory Settings] > [Port 9100])
z
Port Settings
z
IP Mode
z
Host Name
z
IPv4
- IP Address Resolution
- Port Settings
- IP Address
- Subnet Mask
- Gateway Address
z
IPv6
- Enable Manual Address
- IP Address
- Link-Local Address
- Gateway Address
z
Domain Name
z
DNS Configuration
-IPv4
-IPv6
z
DHCP/DDNS
z
WINS Server
z
Port Number
z
TBCP Filter
Note • The TBCP filter can be configured when the Adobe PostScript 3 Kit (optional) is installed.
z
Connection Time-Out
z
Maximum Number of Sessions
Note • The Maximum Number of Sessions can be configured when the LPD port is enabled.
z
TCP-MSS Mode
z
IPv4 Subnet Mask when TCP-MSS Mode is enabled
z
IP Filtering
- IPv4 Filtering
- IPv6 Filtering
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
