Fuji Xerox DocuCentre-IV 3065 Administrator's Guide

Loading Paper
41
Paper and Other Media
2
1 Pull out the Envelop Feeder Tray until it
stops.
Important • While the machine is processing a job, do
not pull out the tray that is being used for
a job
• To prevent paper jams or erroneous
detection of loaded envelopes in a tray by
the machine, do not add envelopes on top
of any remaining envelopes in the tray.
Remove any remaining envelopes in the
tray, and then load those envelopes on
top of the newly loaded envelopes.
• Do not pull out all the trays together.
Otherwise, the machine gets inclined and
turns over, which may cause injuries
2 Load the envelopes in the Envelope Tray
with the side to be copied or printed on
facing up and the edge with the flap against
the left edge of the tray.
Important • Do not load envelopes above the
maximum fill line ("MAX" in the right
figure). It may cause paper jams or
machine malfunction.
• Do not place any paper or objects in the
empty space on the right side of the
Envelope Tray. It may cause paper jams
or machine malfunction.
3 Adjust the paper guides to the size of the envelopes.
4 Push the Envelope Tray in gently until it stops.
Important • When inserting the tray, push it gently. Forcibly pushing in the tray may cause machine
malfunction.
5 Select the envelope size on the control panel.
Important • The machine does not automatically detect the envelope size loaded in the Envelope Tray.
Make sure to select the correct envelope size on the control panel. For information on how to
select the envelope size, refer to "3 Copy" > "Copy" > "Paper Supply (Selecting the Paper for
Copying)" in the User Guide.
Loading Paper in Tray 3 (When Tandem Tray Module is Installed)
The following describes the procedure for loading paper in Tray 3 when the Tandem
Tray Module is installed.
When the machine runs out of paper during copying or printing, a message appears on
the touch screen. Add paper according to the message instructions. Copying or printing
automatically resumes when paper is added.
Note • Carefully fan the paper before loading it in a tray. Otherwise, the paper may stick together,
resulting in paper jams.
For information on changing the paper size and orientation, refer to "Changing the Paper Size for Tray 3
(When Tandem Tray Module is Installed)" (P.47).
Downloaded From ManualsPrinter.com Manuals

Fuji Xerox DocuCentre-IV 3065 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre-IV 3065
Category	All in One Printer
Language	English