Fuji Xerox DocuCentre-IV 3065 Administrator's Guide

Changing the Paper Size
45
Paper and Other Media
2
Changing the Paper Size
This section describes how to change the paper size.
Important • Do not load paper of mixed sizes together into a tray.
Changing the Paper Size for Trays 1 to 4
The following describes how to change paper size in Trays 1 to 4.
Note • The types of paper in Trays 1 to 4 are preset. There are 19 paper types: Plain, Recycled,
Plain Reload, Punched, Letterhead, Pre-printed, Others, Heavyweight, Extra Heavyweight ,
Bond, Lightweight, Transparency, Labels, Envelope, and Custom paper 1 to 5. By default,
plain paper type is set. When changing to a different paper type, change the paper quality
settings to match the type of paper to be loaded so that you can maintain high quality
printing.
For more information on paper type settings, refer to "Changing the Paper Settings" (P.51).
• When loading non-standard size paper, you must register the paper size. For information on
registering paper sizes, refer to "Paper Tray Attributes" (P.119).
For more information on the supported paper size, "Paper Size Settings" (P.130)
For more information on how to copy on non-standard size paper, refer to "3 Copy" > "Copy" > "Paper
Supply (Selecting the Paper for Copying)" in the User Guide. For more information on how to print on
non-standard size paper, refer to the help of the print driver.
1 Pull out the Tray until it stops.
Important • While the machine is processing a job, do
not pull out the tray that is being used for
a job.
• To prevent paper jams or erroneous
detection of loaded paper in a tray by the
machine, do not add paper on top of any
remaining paper in the tray.
2 Remove any paper loaded in the tray.
3 While pinching the two paper guides, move
them to the positions for the paper size you
are loading.
4 Load and align the edge of the paper against
the left side of the tray, with the side to be
copied or printed on facing up.
Important • Do not load paper above the maximum
fill line ("MAX" in the right figure). It may
cause paper jams or machine
malfunction.
Downloaded From ManualsPrinter.com Manuals

Fuji Xerox DocuCentre-IV 3065 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre-IV 3065
Category	All in One Printer
Language	English