2 Paper and Other Media
46
Paper and Other Media
2
5 Push the tray in gently until it stops.
Important • When inserting the tray, push it gently. Forcibly pushing in the tray may cause machine
malfunction.
Note • Affix the paper size label to the front of the paper tray.
For more information on paper type settings, refer to
"Changing the Paper Settings" (P.51).
When the Envelope Tray (Optional) is Installed
The following describes how to change the envelope size in the Envelope Tray
(optional).
1 Pull out the Envelope Tray until it stops.
Important • While the machine is processing a job, do
not pull out the tray that is being used for
a job.
• To prevent paper jams or erroneous
detection of loaded envelopes in the
Envelope Tray by the machine, do not
add envelopes on top of any remaining
envelopes in the tray.
2 Remove any envelopes loaded in the tray.
3 While pinching the two paper guides, move
them to the positions for the envelope size
you are loading.
4 Load the envelopes in the Envelope Tray
with the side to be copied or printed on fac-
ing up and the edge with the flap against the
left edge of the tray.
Important • Do not load envelopes above the
maximum fill line.
5 Push the tray in gently until it stops.
Important • When inserting the tray, push it gently. Forcibly pushing in the tray may cause machine
malfunction.
For more information on paper type settings, refer to "Changing the Paper Settings" (P.51).
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
