Fuji Xerox DocuCentre-IV 3065

Customizing the Control Panel
27
Before Using the Machine
1
z
Media Print - Text
z
Store to WSD
z
Job Flow Sheets
z
Language
z
Screen Brightness
z
Setup
z
Activity Report
z
Fax Receiving Mode
z
Print Mode
Services Home
You can select service buttons, which are displayed on the [Services Home] screen.
If you select [(Not Assigned)], the position of the selected button becomes blank.
1 Press the <Log In/Out> button.
2 Enter the system administrator’s user ID with
the numeric keypad or the keyboard
displayed on the screen, and select [Enter].
When a passcode is required, select [Next]
and enter the system administrator’s
passcode, and select [Enter].
Note • The default user ID is "11111".
• The default passcode is "x-admin".
3 Select [Tools] on the [Services Home]
screen.
Note • When the [Services Home] screen is not
displayed on the touch screen, press the
<Services Home> button.
4 Select [System Settings] > [Common
Service Settings] > [Screen/Button Settings].
123
456
789
0#
C
<Log In/Out> button
Downloaded From ManualsPrinter.com Manuals