ESC/P-K Emulation
531
Appendix
16
Document size 1 Sets the client-created document size.
[99] (Default) : Paper
[100] : Continuous form paper (10 × 12)
[101] : Continuous form paper (10 × 11)
[102] : Continuous form paper (15 × 12)
[103] : Continuous form paper (15 × 11)
[3] : A3
[4] : A4
[5] : A5
[14] : B4
[15] : B5
[21] : 8.5 × 14
[22] : 8.5 × 13
[23] : 8.5 × 11
[24] : 11 × 17
[0] : Postcard
The number of characters printed is: 80 characters/72 rows for continuous
form paper (10 × 12), 80 characters/66 rows for continuous form paper
(10 × 11), 136 characters/72 rows for continuous form paper (15 × 12),
and 136 characters/66 rows for continuous form paper (15 × 11).
Note •When a continuous form paper is selected for [Original Size], [Paper
Position] cannot be set.
•When [Preset%] or [Fit to Cut Sheet] is selected for [Reduce/Enlarge],
the machine automatically calculates the magnification based on a
combination of [Original Size] and [Paper Size]. If the ratio, however,
is outside the range of 45-210%, the document will not be reduced/
enlarged, and will be printed at a scale of 100%. When [2 Up] is
selected, the machine automatically calculates the magnification
based on a combination of [Original Size] and 1/2 of [Paper Size].
•The orientation set here is that of the document. It is not affected by
the orientation of paper loaded in the paper trays.
Orientation 19 Sets the orientation of paper.
[0] (Default) : Portrait
[1] : Landscape
Setting Item
Item
Number
Value
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
